User Contributed                                           MET/CAL PROCEDURE
=============================================================================
INSTRUMENT:            Micro Instrumentÿ5203:Memory Voltmeter
DATE:                  01-Aug-95
AUTHOR:                User Contributed
REVISION:              0
ADJUSTMENT THRESHOLD:  70%
NUMBER OF TESTS:       30
NUMBER OF LINES:       103
CONFIGURATION:         Fluke 5700A
CONFIGURATION:         HP 8116A
=============================================================================
 STEP    FSC    RANGE NOMINAL        TOLERANCE     MOD1        MOD2  3  4 CON
  1.001  ASK-                        P                            F        W
  1.002  ASK+           K                              X
  1.003  HEAD         ÍÍ INITIAL CONDITIONS ÍÍ
  1.004  DISP         Allow the UUT a « hour warm-up.
  1.005  DISP         Set the UUT front panel controls as follows:
  1.005  DISP         MODE ............................................... +DC
  1.005  DISP         RESET ............................................. AUTO
  1.005  DISP         RANGE ................................................ 1
  1.006  DISP         Connect the 5700A V ê A HI and LO outputs to the UUT
  1.006  DISP         INPUT BNC connector.
  1.007  5700         0V                                                S  2W
  1.008  DISP         Adjust the UUT +ZERO control for a UUT reading of .000
  1.008  DISP         (OFF ZERO lamp off).
  1.009  HEAD         {}
  1.010  HEAD         {ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»}
  1.011  HEAD         {º DC VOLTS ACCURACY TEST º}
  1.012  HEAD         {ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ}
  1.013  HEAD         {}ÍÍ DC VOLTS ACCURACY TEST ÍÍ
  1.014  JMP          2.001
  1.015  EVAL
  2.001  5700   1000  1000V          30U                                   2W
  3.001  5700   1000  300V           9U                                    2W
  4.001  5700   100   100.0V         3.0U                                  2W
  5.001  5700   100   30.0V          0.9U                                  2W
  6.001  5700   10    10.0V          0.30U                                 2W
  7.001  5700   10    9.00V          0.30U                                 2W
  8.001  5700   10    8.00V          0.30U                                 2W
  9.001  5700   10    7.00V          0.30U                                 2W
 10.001  5700   10    6.00V          0.30U                                 2W
 11.001  5700   10    5.00V          0.30U                                 2W
 12.001  5700   10    4.00V          0.30U                                 2W
 13.001  5700   10    3.00V          0.30U                                 2W
 14.001  5700   10    2.00V          0.30U                                 2W
 15.001  5700   10    1.00V          0.30U                                 2W
 16.001  5700   1     1.00V          0.030U                                2W
 17.001  DISP         Set the UUT front panel controls as follows:
 17.001  DISP         MODE ............................................... -DC
 17.001  DISP         RANGE ............................................... 10
 17.002  5700   10    -10.0V         0.30U                                 2W
 18.001  5700   10    -9.00V         0.30U                                 2W
 19.001  5700   10    -8.00V         0.30U                                 2W
 20.001  5700   10    -7.00V         0.30U                                 2W
 21.001  5700   10    -6.00V         0.30U                                 2W
 22.001  5700   10    -5.00V         0.30U                                 2W
 23.001  5700   10    -4.00V         0.30U                                 2W
 24.001  5700   10    -3.00V         0.30U                                 2W
 25.001  5700   10    -2.00V         0.30U                                 2W
 26.001  5700   10    -1.00V         0.30U                                 2W
 27.001  HEAD         {}
 27.002  HEAD         {ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»}
 27.003  HEAD         {º AC VOLTS ACCURACY TEST º}
 27.004  HEAD         {ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ}
 27.005  HEAD         {}ÍÍ AC VOLTS ACCURACY TEST ÍÍ
 27.006  JMP          28.001
 27.007  EVAL
 28.001  DISP         Set the UUT front panel controls as follows:
 28.001  DISP         MODE ............................................... +AC
 28.001  DISP         RESET .................................. center position
 28.001  DISP         RANGE ................................................ 1
 28.002  DISP         Connect the 8116A output to the UUT INPUT BNC connector.
 28.003  IEEE         [@8116] M1,W4,FRQ .1 HZ,HIL 1V,LOL -0V,WID 500MS,D0
 28.004  DISP         Set the UUT front panel controls as follows:
 28.004  DISP         RESET ........................ set to MANUAL and release
 28.005  HEAD         [27][91]7m[27][91]5mPlease Wait ...... settling time
 28.006  IEEE         [D5000]
 28.007  HEAD         ÍÍ AC VOLTS ACCURACY TEST ÍÍ
 28.008  MEMI         Use keyboard to enter actual UUT reading in Volts:
 28.009  MEME                                                     >1
 28.010  IEEE         [@8116] M1,W4,FRQ .1 HZ,HIL 1V,LOL -0V,WID .5US,D0
 28.011  MEMI         Use keyboard to enter actual UUT reading in Volts:
 28.012  MATH         MEM1 = M[1]
 28.013  MEMC         V              3.000%
 29.001  DISP         Set the UUT front panel controls as follows:
 29.001  DISP         RESET .................................. center position
 29.001  DISP         RANGE ............................................... 10
 29.002  IEEE         [@8116] M1,W4,FRQ .1 HZ,HIL 2.5V,LOL -0V,WID 500MS,D0
 29.003  DISP         Set the UUT front panel controls as follows:
 29.003  DISP         RESET ........................ set to MANUAL and release
 29.004  MEMI         Use keyboard to enter actual UUT reading in Volts:
 29.005  MEME                                                     >1
 29.006  IEEE         [@8116] M1,W4,FRQ .1 HZ,HIL 2.5V,LOL -0V,WID .5US,D0
 29.007  MEMI         Use keyboard to enter actual UUT reading in Volts:
 29.008  MATH         MEM1 = M[1]
 29.009  MEMC         V              3.000%
 30.001  IEEE         [@8116] D1
 30.002  HEAD         {}
 30.003  DISP         {ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»}
 30.003  DISP         {º THIS COMPLETES THE VERIFICATION º}
 30.003  DISP         {ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ}
 30.004  END